Stainless Steel ThermaData Data Loggers for Food Insutry | Pharmecuticals

11,500.0015,500.00

Stainless Steel ThermaData® data logger range – ideal for food, pharmaceutical and other high temperature applications.

  • integral USB interface for setup and download
  • Auto PDF Summary
  • high temperature range -20 to 125°C
  • food grade 316 stainless steel housing
  • Six probe lengths available
  • FREE Software and USB lead provided FREE
  • No Software to download PDF report

Description

Stainless steel data-loggers that are ideal for food, pharmaceutical and other applications where a high temperature data-logger is required. The Stainless steel ThermaData® logger is housed in a waterproof, food grade 316 stainless steel case to protect the logger from corrosion, impact and moisture (IP66/67).

The ThermaData® logger software allows the user to programme the logging sample/interval rate (1 to 255 minutes), the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes) and a 12-character user ID. The software also incorporates a password protected calibration adjustment feature that allows the user to check the calibration of loggers and make minor adjustments 0.5 °C (±3 °C).

By selecting continuous logging in the software options, it is possible to start the ThermaData® logger only once and never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData® stainless steel data logger will continue recording during and after downloading the data.

Five models of the stainless steel ThermaData® loggers are available, one with with internal sensor and four with optional standard fixed probe dimensions of :

  • Ø3.3 x 50 mm probe
  • Ø4.5 to Ø3.3 mm tip x 100 mm probe
  • Ø4.5 to Ø3.3 mm tip x 150 mm probe
  • Ø4.5 to Ø3.3 mm tip x 200 mm probe

Each logger is supplied with a two metre USB lead and ThermaData® Studio software.

ThermaData® Studio PC software
The ThermaData logger is connected to a PC via the internal USB connector or a USB lead (supplied). By selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The user can also set, within the software, high and low alarm values for a specific application. The information can then be analysed by zooming in, saving as a ‘studio file’ or exporting to other software packages.

USB Connection Point:-  Simply unscrew the end cap to access the USB port. This allows the user to connect the logger to a PC and upload any data collected

Additional information

size

100mm Probe, 150mm Probe, 20 MM FR Probe, 200 mm Probe, 50 mm Probe, Without Probe

Reviews

There are no reviews yet.

Be the first to review “Stainless Steel ThermaData Data Loggers for Food Insutry | Pharmecuticals”

Your email address will not be published. Required fields are marked *