Stainless Steel ThermaData Data Loggers for Food Insutry | Pharmecuticals

Sale

Stainless Steel ThermaData Data Loggers for Food Insutry | Pharmecuticals

Stainless Steel ThermaData® data logger range – ideal for food, pharmaceutical and other high temperature applications.

  • integral USB interface for setup and download
  • Auto PDF Summary
  • high temperature range -20 to 125°C
  • food grade 316 stainless steel housing
  • Six probe lengths available
  • FREE Software and USB lead provided FREE
  • No Software to download PDF report

9,950.0013,950.00 Exc. GST

Clear
SKU: 293 -900 Categories: ,
  • Description
  • Additional information
  • Reviews (0)

Description

Stainless steel data-loggers that are ideal for food, pharmaceutical and other applications where a high temperature data-logger is required. The Stainless steel ThermaData® logger is housed in a waterproof, food grade 316 stainless steel case to protect the logger from corrosion, impact and moisture (IP66/67).

The ThermaData® logger software allows the user to programme the logging sample/interval rate (1 to 255 minutes), the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes) and a 12-character user ID. The software also incorporates a password protected calibration adjustment feature that allows the user to check the calibration of loggers and make minor adjustments 0.5 °C (±3 °C).

By selecting continuous logging in the software options, it is possible to start the ThermaData® logger only once and never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData® stainless steel data logger will continue recording during and after downloading the data.

Five models of the stainless steel ThermaData® loggers are available, one with with internal sensor and four with optional standard fixed probe dimensions of :

  • Ø3.3 x 50 mm probe
  • Ø4.5 to Ø3.3 mm tip x 100 mm probe
  • Ø4.5 to Ø3.3 mm tip x 150 mm probe
  • Ø4.5 to Ø3.3 mm tip x 200 mm probe

Each logger is supplied with a two metre USB lead and ThermaData® Studio software.

ThermaData® Studio PC software
The ThermaData logger is connected to a PC via the internal USB connector or a USB lead (supplied). By selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The user can also set, within the software, high and low alarm values for a specific application. The information can then be analysed by zooming in, saving as a ‘studio file’ or exporting to other software packages.

USB Connection Point:-  Simply unscrew the end cap to access the USB port. This allows the user to connect the logger to a PC and upload any data collected

Reviews

There are no reviews yet.


Be the first to review “Stainless Steel ThermaData Data Loggers for Food Insutry | Pharmecuticals”